SureBond® Products


JOINT STABILIZING SEALERS

SB-7700 Wet Look
Joint Stabilizing Sealer
With Antifungal Film Protection
 

Dries in 24 Hours
  • 3 in 1 Product: Seals, Enhances & Stabilizes Joint Sand
  • Deeply Enhances Surface Tone with Semi-Gloss Finish
  • “Rain Safe” within 90 Minute
  • Provides Water, Stain & UV Protection
  • Inhibits Weed Growth & Insect Infestation
  • Breathable, Immediate Application Solvent Based Sealer
***ADDED ANTIFUNGAL PROTECTS SEALER FILM FROM MOLD, MOSS & ALGAE
 
SB-7700 Joint Stabilizing Sealer is a water-based, single component, self-crosslinking acrylic co-polymer sealer and joint sand stabilizer with outstanding durability. SB-7700 is specially formulated with an antifungal designed to help inhibit the growth of mold, moss and algae on the sealer film when applied to horizontal or vertical surfaces. This product can be used inside and outside, on old and new pavements, sealing the surface and stabilizing joint sand at the same time. It can be applied immediately after paver installation, as it is breathable and will not trap the naturally occurring efflorescence. SB-7700 will also protect the surface from salts, acids and other corrosive chemicals as well as help to provide easier maintenance and to minimize overall surface weathering and deterioration. SB-7700 is non-hazardous and exceeds all VOC/EPA standards. SB-7700 has the consistency of water and is milky white in appearance when applied and then dries clear, creating an enhanced look with gloss finish. SB-7700 is a single application product. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).
 
Joint Stabilizing Sealers can be used just as a sealer for pavers, concrete and other masonry surfaces without joint sand stabilization.
 
Suitable Surfaces
Ideal for shaded areas, pool decks, outdoor showers and other areas where mildew, fungus and algae are a concern. Suitable for concrete and clay pavers, decorative or plain concrete, masonry, natural or manufactured stone, unglazed tile and terrazzo.
 
SB-7700 Wet Look
Joint Stabilizing Sealer
With Antifungal Film Protection
 

SB-8700 Wet Look
Joint Stabilizing Sealer
With Antifungal Film Protection
 

Dries in 90 Minutes
  • 3 in 1 Product: Seals, Enhances & Stabilizes Joint Sand
  • Deeply Enhances Surface Tone with Semi-Gloss Finish
  • “Rain Safe” within 90 Minutes
  • Provides Water, Stain & UV Protection
  • Inhibits Weed Growth & Insect Infestation
  • Breathable, Immediate Application Solvent Based Sealer

***ADDED ANTIFUNGAL PROTECTS SEALER FILM FROM MOLD, MOSS & ALGAE

SB-8700 Wet Look Joint Stabilizing Sealer is an advanced premium acrylic sealer that is ‘rain safe’ 90 minutes after application and will not yellow under exposure to sunlight. It is a 3 in 1 product, it enhances surface tone with semi-gloss finish, protects the substrate surface and stabilizes joint sand. SB-8700 is specially formulated with an anti-fungal designed to inhibit the growth of mold, moss and algae on the sealer film when applied to horizontal or vertical surfaces. SB-8700 will penetrate the substrate and provide a protective layer on the surface that is resistant to mild acid, alkali, and salt attacks. SB-8700 will increase the stain resistance of the surface and allow easier cleaning, maintenance, and extended wear. SB-8700 can be applied immediately after paver installation, as it is breathable and will not trap naturally occurring efflorescence and moisture. SB-8700 is a solvent based product with a consistency of water and is clear in appearance when applied.  SB-8700 is designed as a one-coat application but a second coat may be applied if desired. It will deeply enhance the surface tone with a semi-gloss finish. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).
 
Joint Stabilizing Sealers can be used just as a sealer for pavers, concrete and other masonry surfaces without joint sand stabilization.
 
Suitable Surfaces
Ideal for concrete and clay pavers, flat and stamped concrete, or masonry surfaces such as stucco, retaining walls, concrete walls and exposed aggregate. Also works on limestone, sandstone and natural paving stones.
 
SB-8700 Wet Look
Joint Stabilizing Sealer
With Antifungal Film Protection
 

SB-1000 PermStikTM
 

  • PICP Chip Stabilizer
  • PICP Chip Binder – Minimizes chip loss and scattering
  • Immediate, Easy Application
  • Clear, Water Based Acrylic
  • VOC Complaint
  • Durable Natural Finish
  • Protective – Guards against surface intrusion of salts and other contaminants, and resists staining

SB-1000 PermStik™ is a hybrid polymer blend designed to bind together granite chips used in permeable paving systems and minimize their loss due to extractive forces from washout, traffic,and pavement sweeping. SB-1000 PermStik™ is a water-based product that exceeds all VOC and EPA standards. SB-1000 PermStik™ is milky white when applied but dries to a clear, natural look. SB-1000 PermStik™ maintains flexibility to accommodate thermodynamic cycling and related movement. Cured product is freeze resistant to -40°F and stable up to a temperature of 150°F.
 
SB-1000 PermStikTM
 

SB-1300 Natural Look Matte Finish

  • Joint Stabilizing Sealer
  • Preserves & Protects Natural Surface Tone
  • Provides Water, Salt, Stain & UV Protection
  • Bonds Joint Sand to Reduce Sand Loss
  • Inhibits Weed Growth & Insect Infestation
  • Promotes Easier Cleaning & Maintenance
  • Breathable, Immediate Application Water Based Sealer

SB-1300 Joint Stabilizing Sealer is a water-based, single component, acrylic co-polymer sealer and joint sand stabilizer. This product can be used inside and outside, on old and new pavements, sealing the surface and stabilizing joint sand at the same time. It can be applied immediately after paver installation, as it is breathable and will not trap naturally occurring efflorescence. This breathability feature also decreases freeze thaw damage and improves surface durability and ease of maintenance. SB-1300 is non-hazardous and VOC/EPA compliant. SB-1300 has the consistency of water and is milky white when applied and dries clear, creating a natural look with matte finish. SB-1300 is a single application product. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).
 
Joint Stabilizing Sealers can be used just as a sealer for pavers, concrete and other masonry surfaces without joint sand stabilization.
 
Suitable Surfaces
Ideal for concrete and clay pavers, decorative or plain concrete, masonry, natural or manufactured stone, unglazed tile and terrazzo.
 
SB-1300 Natural Look Matte Finish

SB-7000 Enhanced Look Gloss Finish

  • Joint Stabilizing Sealer
  • Moderately Enhances Surface Tone with Gloss Finish
  • Provides Water, Salt, Stain & UV Protection
  • Bonds Joint Sand to Reduce Sand Loss
  • Promotes Easier Cleaning & Maintenance
  • Breathable, Immediate Application Water Based Sealer

SB-7000 Joint Stabilizing Sealer is a water-based, single component, self-crosslinking acrylic co-polymer sealer and joint sand stabilizer with outstanding durability. This product can be used inside and outside, on old and new pavements, sealing the surface and stabilizing joint sand at the same time. It can be applied immediately after paver installation, as it is breathable and will not trap the naturally occurring efflorescence. SB-7000 will also protect the surface from salts, acids and other corrosive chemicals as well as help to provide easier maintenance and to minimize overall surface weathering and deterioration. SB-7000 is non-hazardous and exceeds all VOC/EPA standards. SB-7000 has the consistency of water and is milky white in appearance when applied and then dries clear, creating an enhanced look with gloss finish. SB-7000 is a single application product. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).
 
Joint Stabilizing Sealers can be used just as a sealer for pavers, concrete and other masonry surfaces without joint sand stabilization.
 
Suitable Surfaces
Ideal for concrete and clay pavers, decorative or plain concrete, masonry, natural or manufactured stone, unglazed tile and terrazzo.
 
SB-7000 Enhanced Look Gloss Finish

WET LOOK SEALERS

SB-6000 Wet Look Sealer

  • Deeply Enhances Surface Tone with Satin Finish
  • Protects Surface by Resisting Water, Stains & Salt
  • Promotes Easier Cleaning & Maintenance
  • Low VOC Formula
  • Breathable, Immediate Application Water Based Sealer

SB-6000 Wet Look Sealer is a proprietary water-based, modified latex, exterior quality sealer. SB-6000 will seal and enhance the beauty of new and old surfaces with a luxurious, wet look sheen with pronounced color enhancement and satin finish. It is breathable and will not trap naturally occurring efflorescence, allowing it to be applied immediately after new paving stones are installed. SB-6000 improves surface durability and freeze-thaw resistance while protecting the surface from salt, acid and staining. It exceeds all VOC, EPA and OSHA standards. SB-6000 Wet Look Sealer has the consistency of water and is milky white when applied; it dries to a clear, wet look on the surface of the pavement. SB-6000 Wet Look sealer can be used both inside and outside on old and new pavements. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).
 
Suitable Surfaces
Ideal for concrete and clay pavers, flat and stamped concrete, or natural and manufactured stone. Also suitable for masonry, retaining walls, porous or unglazed tile and terrazzo. Not recommended for marble, granite or ceramic tile.
SB-6000 Wet Look Sealer

SB-6400 Wet Look

  • Penetrating Sealer
  • Deeply Enhances Surface Tone with Matte Finish
  • Water, Salt & Stain Resistant
  • Durable & Long Lasting Chemically Bonded Protection
  • High Performance Silane/Siloxane Resin Technology
  • Resists Biological Growth (Mold, Moss & Algae) Due to Superior Water Repellency
  • Breathable, Low VOC Water Based Sealer

SB-6400 Wet Look Penetrating Sealer is a low VOC, water based blend of silane/siloxane and polymers that chemically bonds to the substrate creating both a water and oil repellent finish. SB-6400 will seal and enhance the beauty of new and old surfaces with a luxurious, wet look, matte finish that enriches surface tone and color contrast. It is breathable and will not trap efflorescence, allowing it to be applied immediately after new paving stones are installed. SB-6400 improves surface durability and freeze-thaw resistance while protecting the surface from salt, acid, and staining from oil, food, and other contaminants. SB-6400’s water repellent feature will produce beading of water on the surface and will help to inhibit biological growth such as mold, moss and algae. SB-6400 has the consistency of water and is milky white when applied. Once dry, it will enhance color and contrast with a matte (while maintaining a natural look) finish.  SB-6400 Wet Look Penetrating Sealer can be used both inside and outside on old and new pavements. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).
 
Suitable Surfaces
Ideal for horizontal and vertical surfaces including cultured and natural stone containing quartz or other silicas. Also suitable for concrete, concrete and clay pavers, grout, unglazed tile and terra cotta. Not recommended for marble, limestone, agglomerate tiles and polished surfaces with a high gloss finish as they do not absorb the sealer.
SB-6400 Wet Look

SB-9000 Wet Look Sealer

  • Deeply Enhances Surface Tone with Gloss Finish
  • Provides Water, Salt, Stain & UV Protection
  • Promotes Easier Cleaning & Maintenance
  • Breathable, Immediate Application Solvent Based Sealer

SB-9000 Wet Look Sealer will seal and enhance the beauty of new and old interlocking pavers, concrete, masonry and other related surface with a rich, enhanced, wet look and gloss finish. SB-9000 is the perfect product to restore the look of old/tired pavers. The high solids formula combines properties of adhesion, flexibility and UV light resistance to provide a long lasting seal. SB-9000 will penetrate the substrate and provide a protective layer on the surface that is resistant to mild acid, alkali and salt attack. SB-9000 will increase the stain resistance of the surface to allow for easier cleaning, maintenance and extended wear. SB-9000 can be applied immediately after paver installation, as it is breathable and will not trap naturally occurring efflorescence and moisture. SB-9000 is a solvent based product and is clear in appearance when applied.  SB-9000 is designed as a one-coat application but a second coat may be applied if desired. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).
 
Suitable Surfaces
Ideal for concrete and clay pavers, flat and stamped concrete, or masonry surfaces such as stucco, retaining walls, concrete walls and exposed aggregate. Also works on limestone, sandstone and natural paving stones.
 
SB-9000 Wet Look Sealer

PENETRATING SEALERS

SB-4400 Perma-Seal®
Invisible Penetrating Sealer
 

Dries in 24 Hours
Ideal for horizontal and vertical surfaces including concrete, concrete and clay pavers, grout, unglazed tile and terra cotta. Suitable for cultured and natural stone containing quartz or other silicas. Not recommended for granite, marble, limestone, slate, agglomerate tiles and surfaces with a high gloss finish as they do not absorb the sealer.
 
  • Water Repellent & Salt Blocker
  • Durable & Long Lasting Protection
  • Non-Film Forming with Transparent Finish
  • High Performance Silane/Siloxane Blend
  • Resists Biological Growth (Mold, Moss & Algae) Due to Superior Water Repellency
  • Breathable, Solvent Based Sealer

SB-4400 PERMA-SEAL™ Invisible Penetrating Sealer is a penetrating, breathable silane/siloxane blend solvent based sealer that protects horizontal and vertical surfaces from water penetration and salt damage from the use of de-icers or exposure to salt air. SB-4400 has the consistency of water and is clear in appearance when applied and dries clear with an invisible finish.  Some surfaces may darken slightly.   It can be used indoors (with proper ventilation) and outdoors on both new and old surfaces. SB-4400 can be applied immediately, as its unmatched breathability will not trap efflorescence.  On new concrete, SB-4400 should be applied once concrete is fully cured (30 days after installation).  SB-4400 requires two coats.  Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).
 
Suitable Surfaces
Ideal for horizontal and vertical surfaces including concrete, concrete and clay pavers, grout, unglazed tile and terra cotta. Suitable for cultured and natural stone containing quartz or other silicas. Not recommended for granite, marble, limestone, slate, agglomerate tiles and surfaces with a high gloss finish as they do not absorb the sealer.
 
SB-4400 Perma-Seal®
Invisible Penetrating Sealer
 

SB-4000 Water Repellent & Salt Blocker

  • Invisible Penetrating Sealer
  • Durable & Long Lasting Protection
  • Non-Film Forming with Transparent Finish
  • High Performance Silane/Siloxane Blend
  • Resists Biological Growth (Mold, Moss & Algae) Due to Superior Water Repellency
  • Low VOC Formula
  • Breathable, Water Based Sealer

SB-4000 Water Repellent & Salt Blocker Invisible Penetrating Sealer is a penetrating, breathable silane/siloxane blend, water based, low VOC sealer that protects horizontal and vertical surfaces from water penetration and chloride salt damage from the use of de-icers or exposure to salt air. SB-4000 has the consistency of water and is milky white in appearance when applied and dries clear with an invisible finish.  Some surfaces may darken slightly.  SB-4000 is not hazardous and exceeds all VOC and EPA standards.  It can be used indoors and outdoors on both new and old surfaces.  SB-4000 can be applied immediately, as its unmatched breathability will not trap efflorescence. On new concrete, SB-4000 should be applied once concrete is fully cured (30 days after installation).  SB-4000 requires two coats.  Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).
 
Suitable Surfaces
Ideal for horizontal and vertical surfaces including concrete, concrete and clay pavers, grout, unglazed tile and terra cotta. Suitable for cultured and natural stone containing quartz or other silicas. Not recommended for granite, marble, limestone, slate, agglomerate tiles and surfaces with a high gloss finish as they do not absorb the sealer.
SB-4000 Water Repellent & Salt Blocker

SB-5000 Stain Blocking Sealer

  • Blocks Oil, Water & Organic Staining
  • Durable & Long Lasting Protection
  • Non-Film Forming with Transparent Finish
  • Low VOC Formula
  • Breathable, Immediate Application Water Based Sealer

SB-5000 Stain Blocking Invisible Sealer is a water based, penetrating, low VOC sealer that provides an invisible, durable barrier against water, oil and stains on horizontal and vertical surfaces.  Ideal for driveways, industrial flooring, building entrances, shopping malls, food courts and other surfaces at risk for oil, food and/or other staining. SB-5000 is an aqueous fluorochemical dispersion that does not contain any silicone or wax components. SB-5000 has the consistency of water and is milky white in appearance when applied and dries clear with an invisible finish.  It can be used indoors and outdoors on both new and old surfaces.  SB-5000 can be applied immediately, as its unmatched breathability will not trap efflorescence.  SB-5000 requires two coats.  Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).
 
Suitable Surfaces
Ideal for driveways, industrial flooring, building entrances, shopping malls, food courts and other surfaces at risk for oil, food or other staining. Suitable for concrete and clay pavers, masonry surfaces, natural stone, grout, unglazed tile and terra cotta. Not recommended for surfaces with a high gloss finish as they do not absorb the sealer.
 
SB-5000 Stain Blocking Sealer